GAZI UNIVERSITY INFORMATION PACKAGE - 2019 ACADEMIC YEAR

COURSE DESCRIPTION
OXYGEN GAS WELDING TECHNIQUE/KYK-105
Course Title: OXYGEN GAS WELDING TECHNIQUE
Credits 3 ECTS 3
Course Semester 1 Type of The Course Compulsory
COURSE INFORMATION
 -- (CATALOG CONTENT)
 -- (TEXTBOOK)
 -- (SUPPLEMENTARY TEXTBOOK)
 -- (PREREQUISITES AND CO-REQUISITES)
 -- LANGUAGE OF INSTRUCTION
  Turkish
 -- COURSE OBJECTIVES
 -- COURSE LEARNING OUTCOMES
Understands oxy-gas welding, theoretical and practical knowledge about welding 2nd
Oxy - Gas welding is required to apply the rules of occupational health and safety
Knows the problems that can be encountered in oxy - gas welding, makes the process for the solution of these problems.
Selects suitable additional metal in oxy-gas welding
Has knowledge about the production of carbide, oxygen and acetylene gases. Makes appropriate welding flame adjustment.
Oxygen Gas and Acquisition, Acetylene Gas, Acetylene Production, Carbide, Carbide methods are obtained. Safety Used in Acetylene Tubes
Different types of steel, cast iron, aluminum and copper materials (plate, profile, pipe) are welded together in different positions (horizontal, vertical, ceiling, etc.).
Soldering of different types of steel, cast iron, aluminum and copper materials (sheet, profile, pipe) in different positions (horizontal, vertical, ceiling, etc.)
After welding, it performs quality control (destructive - non-destructive testing) and repair and maintenance welds when necessary.

 -- MODE OF DELIVERY
  This course will only face-to-face training.
 --WEEKLY SCHEDULE
1. Week  1. Introduction: Introduction, objectives and learning objectives, occupational health and safety rules
2. Week  2. General information about Oxy - Gas welding, Oxy - Gas welding, Elements used in Oxy - Gas welding, welding flame and setting.
3. Week  3. Oxy-Gas welding with horizontal and wireless welding seam drawing, Oxy-Gas welding with blunt additional welding, right and left welding
4. Week  4. Oxy-Gas welding with horizontal and wire welding seam drawing, Oxy-Gas welding with blunt additional welding, right and left welding
5. Week  5. Horizontal radio outer corner with Oxy-Gas welding, wire outer corner welds, Horizontal inner corner welds with Oxy-Gas welding
6. Week  6. Horizontal radio outer corner with Oxy-Gas welding, wire outer corner welds, Horizontal inner corner welds with Oxy-Gas welding
7. Week  7.Oxy-Gas welding with side wall welding, overlay welding, wire blunt joint welding, vertical corner welding, ceiling welding
8. Week  8.Oxy-Gas welding with side wall welding, overlay welding, wire blunt joint welding, vertical corner welding, ceiling welding
9. Week  9. Butt welding and T welding of small diameter pipes with Oxy-Gas welding, Butt and corner welding of profiles
10. Week  10. Oxy-gas welding, butt welding and T welding of small diameter pipes, butt and corner welding of profiles
11. Week  11. Welding of copper and its alloys by Oxy-Gas welding, Brass Welding
12. Week  12. Oxy-gas welding and welding of aluminum and alloys
13. Week  13. Soft soldering, brazing
14. Week  14. Quality control procedures and repair - maintenance supply
15. Week  
16. Week  
 -- TEACHING and LEARNING METHODS
 -- ASSESSMENT CRITERIA
 
Quantity
Total Weighting (%)
 Midterm Exams
1
50
 Assignment
0
0
 Application
0
0
 Projects
0
0
 Practice
0
0
 Quiz
0
0
 Percent of In-term Studies  
50
 Percentage of Final Exam to Total Score  
50
 -- WORKLOAD
 Activity  Total Number of Weeks  Duration (weekly hour)  Total Period Work Load
 Weekly Theoretical Course Hours
14
2
28
 Weekly Tutorial Hours
14
1
14
 Reading Tasks
0
 Searching in Internet and Library
0
 Material Design and Implementation
10
1
10
 Report Preparing
0
 Preparing a Presentation
0
 Presentation
0
 Midterm Exam and Preperation for Midterm Exam
3
4
12
 Final Exam and Preperation for Final Exam
3
3
9
 Other (should be emphasized)
0
 TOTAL WORKLOAD: 
73
 TOTAL WORKLOAD / 25: 
2.92
 Course Credit (ECTS): 
3
 -- COURSE'S CONTRIBUTION TO PROGRAM
NO
 PROGRAM LEARNING OUTCOMES
1
2
3
4
5
1Uses the principles of mathematics and science in the field of welding technology.X
2Solves problems related to the profession.X
3Solves the problems in the field of welding with practical and theoretical knowledge.X
4Uses the technical tools and equipment necessary for the engineering practice by having training.X
5Uses technical drawing skills in the field.X
6Reads the project drawings including welded constructions.X
7Design experiments related to the profession.X
8Does interdisciplinary teamwork.X
9Uses information technologies effectively.X
10Draws work part drawings with computer programs.X
11Mesleği ile ilgili gelişmelere göre kendini yeniler.X
12Continuously develops itself as the necessity of lifelong learning.X
13Communicate effectively verbally and in writing in Turkish.X
14Follows the developments in the field and communicates effectively by using a foreign language at least at the general level of European Language Portfolio A2.X
15Communicates with technical drawing.X
16Apply his / her profession in accordance with ethical, social and legal values.X
 -- NAME OF LECTURER(S)
   (-)
 -- WEB SITE(S) OF LECTURER(S)
   (-)
 -- EMAIL(S) OF LECTURER(S)
   (-)